GFRPINDIA
Composite Tech · Official India Partner

GFRP & FRP rebar production lines in India

We picked this line for our own factory in Pithampur before we ever sold one. Real pultrusion machinery engineered for IS 18256 compliance, lowest conversion cost, and continuous multi-shift production.

Our bias
We want India making real GFRP, not lookalikesWe are not neutral and we would rather say why: every good line that starts here makes the whole industry harder to fake.
Before buying
Seventeen checks for any line, ours includedWe send the full list to anyone who asks. It names no brand and recommends no machine.
Verify us
Ring the factory in Moldova yourselfTheir number is on the visit page. So are owners of lines running in India.
40+Countries with these lines
PithampurOur own plant
MoldovaWhere they are built
IS 18256What the bar is tested to
The Machines

GFRP & FRP Rebar Machinery Lines

Engineered in Moldova by Composite Tech and running commercially at our Pithampur plant. High-speed multi-strand pultrusion lines, CNC stirrup benders, and welded composite mesh equipment.

CT2

Straight rebar · two bars

The entry line. Smallest footprint of the three and the usual starting point for a plant running one or two diameters.

View specifications →

2Bars at once
3–20 mmDiameter range
3-phaseSupply
CaterpillarPuller type

CT4

Straight rebar · four bars

The common choice. Enough line for a plant selling into private work with room to take a bigger order.

View specifications →

4Bars at once
3–20 mmDiameter range
31.5 × 5.2 × 2.5 mFootprint L×W×H
CaterpillarPuller type

CT6

Straight rebar · six bars

What we run at Pithampur. Same footprint as the CT4, more bars through it.

View specifications →

6Bars at once
3–20 mmDiameter range
35 kWConnected power
380 V3-phase supply

CNC bent

Bent elements

Stirrups and shaped elements, cut and bent to drawing. Different economics from straight bar, usually better.

View specifications →

6–16 mmDiameter range
CNCBending control
ProgrammableShape memory
Separate lineNot an attachment

CT1M / CT2M

Mesh

Welded GFRP mesh for slabs and surface beds.

View specifications →

1 or 2Mesh widths
ProgrammableGrid spacing
Roll or sheetOutput form
Separate lineNot an attachment

Why we are doing this

We have a bias and it is worth stating plainly. We want India making real GFRP rebar. There is already too much material in this market that looks like GFRP and does not behave like it, and every plant that starts on a line which cannot hold tolerance makes that worse — for the industry, and for whoever ends up with that bar in their slab. So we would rather help you set up a line that produces material an engineer can rely on than sell you a machine you will resent.

Composite Tech has production lines running in over 40 countries, including the USA, Spain and Mexico.